Since 1958, this legendary style of Gino Sarfatti has depicted the conventional mid-century chandelier in an ultra-modern manner. Every detail in this modern ceiling light is remarkable, from its mirror-polish finish to the way each bulb is fitted with its own horizontal arm and the grateful wire meander down the stem. Each of the finishing points is exceptional.
“The general concept behind this project is to offer a lamp that can be modified indefinitely to satisfy all the lighting needs. We’ve created a new kind of lamp which is placed in the room, naturally like a plant, with long cables that allow full freedom to change the direction and height of the source of the light. The device is a variant of the industrial lamp shown in Paris in 2010 in the Kreo Gallery. The industrial variant is TO Liane’ lamp. & E. & & E. Bouroullec. Bouroullec. Light fitting suspended. Body with a photo-etched optical polycarbonate in a varnished aluminum pan. Photoetched ABS internal reflector. Body to be guided. Directly powered by the power supply. The cable is 9 meters long and can therefore be suspended from the ceiling by 3 metres. Type of wall plug and dimmer / cable switch.
Floor light with direct lighting. Foundation in marble of white Carrara. Telescopic stem of satin finished stainless steel. The aluminum swivel and the height-adjustable reflector are pressed, polished and zapon-lacked. “We thought of a lamp that reflected light upon a table. It already existed, but you needed to walk around it. To provide enough room around the table, you had to be on the base, at least two meters away. That’s how the concept was developed for Arco. We tried to make it commercially viable, so we noticed that curved iron steel angles worked very well.
Diffuse light suspended lighting system. Body made of extruded, black powder-NC machining aluminum, diffuser of optical silicone in platinum. With an electrical and mechanical link system designed for a personalized product setup, every part can be linked to the power pack. Two-lamp roses are available: lamps under 70W power, and lamps under 190W power. Class III Roses are also available for remote power supply systems: the variant for cement installations is recessed for plasterboard ceilings. Class III Roses are also available for remote energy suppliers. The integrated electronics in the rose make the use of dimming systems: move, 1-10, potentiometer, DALI. Under the absence of such devices, the push mechanism used in the rose may be used to set the light flow. Size of cable 2.5 m
Rechargeable direct light table lighting device. Base and dome in coloured PC. Diffuser in Opaline injection moulded photo-engraved PC. 24-hours’ autonomy, charging via Micro-USB-C. Push-button switch positioned on the base provides the 4-step dimmer function. Battery status indicator positioned under the base. USB-C charging cable included, useful length 120cm. USB battery charging on plug with interchangeable plugs.
The Bouroullec brothers designed a technical lighting line that has been covered in a thin leather cover to achieve a sinuous line without interruptions. It is the perfect balance between the soft leather and the hard aluminium that keeps its shape.
Timeless beauty of dematerialization in high technology. An etheric, organic, and nearly irrelevant body. The naked transparency foundation can be personalized to reflect the personal taste with a range of exchangeable finishes and materials. A radiant light table lamp. Clear transapent basis and diffuser moulded PMMA injection. The light source for Edge Lighting technology. Length of cable 200 cm, dimmer switch with ON-OFF feature and a adjustment of 10-100 percent light. Power supply of the plug-interchangeable connectors.
Towards a little Bon Jour table edition, suitable for smartphone cordless use. The micro USB battery has a six-hour life. The immediate lighting of the cableless table lamp. The base and top cover in ABS are painted or electroplated. Clear translucent diffuser and soft shade moulded PMMA injection. The light source for Edge Lighting technology. Battery life for 6 hours, Micro-USB rechargeable. The USB-C connector cable included in the box is a useful 120 Cm long slide switch below the foundation. USB battery adapter Plug-in with connectors that can be shared.
“I wanted to design a light with a dual purpose. An uplight, illuminating the space with ample ambient lighting, that with a delicate rotation becomes a dim reading companion. A notion of balance, with a cone resting delicately on a rotating rod at its point.” Anastassis
This compact floor lamp is elegant and graceful and features intelligent details from head to toe. The revolving cone diffuser provides direct light at the top which can be repositioned. A beautiful white Carrara or black Marquina marble base weights on the bottom. The stem and cone come in polished steel or brushed brass. The diffuser is a photoengraved opal (polycarbonate) injection molded Device. The 260 centimeter power cord features a foot dimmer switch with ON-OFF functions and 10-100 per cent light adjustment. There are interchangeable sockets in the plug-in power supply.
Also available as an outdoor lamp
“Chasen derives its influence from an ancient Oriental instrument, the traditional bamboo whip which was employed during the tea ceremony. The fine filaments of the bamboo are still shape-changing,” Patricia Urquiola said. Security of liquid paint. Die-cast foundation made from aluminum, 30 percent polyamide reinforced fiberglass ceiling rose connected to a galvanised and pressed ceiling frame. In this version, a mechanical motion to open louvers can change the light emission which varies the luminaire’s shape. The FEP / PVC control cable, steel suspension cable, has the same luminaire colour.
I always see these electric strings from the window while I sit on a train moving. The way the pylons bind, they divided the landscape and are so majestic and poetic, at the same time. Michael Anastassiades Suspension Lamp offering diffused illumination. I tried to turn into interior design. Matt black lacquered aluminum cast body with smooth, transparent lacquered finish. Diffuser optical in the opal machine. 12 meter suspension system with a coaxial cable reinforced by Kevlar.Differently available in black PC and power socket with matt black varnished PC floor switch. Wall / ceiling connection. For optical control, the on / off switch is electronic. The Bluetooth Android and Apple Remote Control device on / off and dimmers are controlled.
Another incredible lighting collection designed by Michael Anastassiades for FLOS. Coordinates is a series of interlocking linear LED lights that are inspired by the Cartesian grid. These lights are available in a broad array of set configurations that would suit both standard or high ceilings.
“Two spheres only touch each other. A small table lighting fixture containing a solid aluminum spheres, which are then coated with a 24 K gold gold coating. Blown glass opal diffuser. LED illumination source with dimmer on the power cord.” All spheres touch only to each other. One small and precious material, placed under a â timbered glass.â tall.
A diffuse lights table lamp. CNC machining body made of polished or anodized aluminum. The opal glass diffuser is hand-blown. Longitude of power cord 200 cm, with the ON-OFF control dimmer and light change of 10-100 percent. Power supply with interchangeable connectors
A height adjustable during light is hanged within a case, while a wireless version provides contactless loading to power a luminous lamp. The lamp can be moved freely if lighting is necessary elsewhere, normally on the charging platform. A structure (this is the sense of the â “‘ € Gaku’s in Japanese) which is built between accessories and meubles and which interacts with lamps and various matching objects.
The lamp settings provide a mode during the operation of the lamp when you sit on the charge station and when you walk away the lamp is turned on to the position of the lamp itself. Magneten carry bowls, vases, a tray, a mirror, books and other accessories, and keep them at the center of the frame without having to touch a wide area. The two compliments combine simple, as if one were rearranging the inside of a miniature room casually.
Dimmer configuration included in the wired or in wireless version.
The basic idea behind the lights of the Glo-Ball family is to achieve full light diffusion using hand-blown, grayed white opaline glass. The shape: like the moon, a flattened globe is lit up like a flat disk. Lamp for table / desk with diffused light. Diffuser consists of a hand-blown, externally acidetched opaline glass and a threaded aluminum ring neck with alodine plate finish. Injection-molded polyamide foundation reinforced by 30% fiberglass. Gray shaped aluminum diffuser frame with die-cast. The electronic dimmer on the cable allows light brightness to be changed.
Directly lit table lamp. Aluminum structure with external transparent methacrylate diffuser and a diffuser led by opal pc on base with a 3 phase feature. Using a USB port in the back of the base, the normal smartphones and Tablets (max 1.5A) are recharged. The optical switch sensor is available at base. Adaptor with interchangeable connectors on plug connector. The power chord measures 2.5 meters.
2005 Table lamp for direct reading and ambient lighting designed by Philppe Starck. Cast aluminum is the body with a rubber overlay cover and a gloss of 18 K or chrome gold plated finish. Matte black plasticized shade of paper with silk-screened internal gold or white and silkscreened internal silver. The electronic dimmer on the cable allows light brightness to be changed.
2005 Table lamp for direct reading and ambient lighting designed by Philppe Starck. Cast aluminum is the body with a rubber overlay cover and a gloss of 18 K or chrome gold plated finish. Matte black plasticized shade of paper with silk-screened internal gold or white and silkscreened internal silver. The electronic dimmer on the cable allows light brightness to be changed.
The FLOS IC Floor Lamp is a balance case study. The artist Michael Anastatizades was inspired by the ability to rotate and movement the spheres around the body of the juggler after seeing a video clip by a touch juggler, and his starting point was to capture the moment when spheres appeared to freeze on his arms and bottom, which gave birth to an IC series. The well thought-out “flosophy” of the FLOS involves playing with light (and its absence). Combine this light experimentation and bold shape, material and LED development experiments— plus the iconic concepts of internationally renowned designers — and the result is poetic versatility at its finest.
Also available as an outdoor lamp
This set explores balance. There are a variety of lights: table lights, wall lights, roof slopes and deck-mounted lighting that form a sphere beautifully balanced by the edge of a rope. Lights diffused from the suspension light. Brace frame, polished and clear, chromium or matt black varnished steel. Opal diffuser blown glass. It really is one of the legendary latest FLOS launches, and the true artifact is a sight to look at.
The balance discusses this set. There are a variety of luminaires: table lights, wall lights, ceiling pendants, and roof mounted light that have a perfectly balanced sphere on the bottom of a rod. Light diffused by the table lamp. Bronze frame of varnished or chrome steel in brown and clear. Opal diffuser Blown mirror. Sleep on the chord of control.
Included is a thin, 90-degree steel frame by renowned designer Michael Anastassiades. A blown-glass opaline orb thoroughly balances from there. The roof and wall lamp, which casts diffuse light, is available now in a brand new black finish, adding dimensions to the impressive array of disappointingly simplistic designs. IC lights C / W can be mounted on a wall or on a building. IC Lights C / W comes with the brass, chrome, or black finish in two versions.
The lightbulb has always been protected by a glass globe, this now disappears in favour of the light. It is both poetic and surrealistic idea of dematerialised architectural lighting and the memory of the space occupied by the light.
Thanks to its unique design and magnetic technology Infra-Structure offers a singular way to grow your lighting design in the architectural space. The Infra-Structure lighting system by FLOS can be controlled by an app that is available on IOS or Android, allowing you to control the system’s luminaires and ambience connected via Bluetooth.
“With the project Kelvin Led I always believed this is the case.” The Antonio Citterio Adjustable table lamp provides direct illumination, with double pantograph arm and adjustable head.’ You are only rarely aware of and design the product which, in one way or another, becomes an archetype. Aluminum body fused. Skin fused. Die-cast outer head of titanium, with methacrylate diffuser injection-molded. External ABS BASE layer. Extruded square aluminum tube alloy frame (12×12 mm), mechanically machined, and consists of an injection-molded resin sliding block and stainless steel load-compensation mechanism. External rods 3 mm in diameter. Specific finishes are available in white, anthracite, black or chrome. For an optical device located in the ear, the ON / OFF switch is electronic. PERSONAL MODE (orange) Dimm the strength of light you need. Two choices to choose:- Green mode now Kelvin LED is green and, with the automatic adjustment for ambience light, saves even more energy.
“Never leave two Miss K alone, they reproduce, but they grow into something better thanks to the evolutionary miracle: Philippe Starck’s Ktribesa
Luminaire table that allows light diffusion. Basis, support for the rod and diffuser in Zamak alloy diecast, polished and chromium plating. Basic cover of PA (nylon) black injection molded. Opal internal diffuser of the opal injection moulded PC (polycarbonate). Outer diffusers of translucent or fumé PMMA, silver and bronze on the inner rim, coated with vacuum aluminum. Upper band, entirely transparent or diffuser and silver diffuser injectionmolten PC (polycarbonate) or transparent brown for the outer diffuser bronze.
fuser.
Philippe Starck designed La Plus Belle to offer the best light possible. Under the optical silicone diffuser, special LEDs are covered, mounted in a very typical fashion to improve diffusion uniformity and provide unique performance. In addition, the light at La Plus Belle (2700 K) is nice and soft and can be controlled through the dimmer with an integrated sensor in the mirror. A range of finishes include a polished gold, polies, polished bronze and vivid smokestripe aluminum frame. The Plus Belle mirror can be suspended from the wall using a double-magnet mounting system for esthetic effects.
Light Bell is a general, suspension luminaire designed by Piero Lissabononi for indoor environments. The improved trendy light for industry-think high up first and then think over again because the Light Bell isn’t the room. The proportion of this trendy twist on the realistic classic, exquisite finish and a simple intention ring real.
The May Day is a lamp, which was signed by Konstantin Grcic and awarded the Gold Compass Prize for different use and settings, which can be placed or suspended on a table, using a realistic handle that serves as a cable rotor as well. Light installation of the utility. Tapered opaline diffuser injection molded. Hook / handle made of 10 percent talc-filled polypropylene injection molded, even serving as a rope winder. Switch the handle on the push button.
This is the ‘t’ version of Antonio Citterio’s famous Kelvin Led table light. The Led technology in the head of the conventional model has moved the output to a plain, compact body. The Led technology In combination with a chemical diffuser, 30 LEDs provide dry, gentle, comfortable illumination, without sharp contrasts or brilliance. To switch the light on / off and change brightness, a special optical sensor is used. Forward lighting table lamp. Pressed aluminum head, divider with aluminum aluminum surround in photo graved methacrylate. Connect power pack, pressofused zamak foundation. Head to be led. ON / OFF switchs to 2 intensities (100 percent–50%–0 percent) with soft touch technology and light flow modification. Power pack with interchangeable connectors.
The Miss K table lamp, developed by visionary designmaster Philippe Starck, gives its work an excellent duality. If unlight, the transparent PC (polycarbonate) external diffuser”that is internally finished with a slim metallic tint with high vacuum aluminization process”rests. If the light is lit, the diffuser is transparent and appears to be looking at a x-ray of a lamp. The lighting is lit. A fully transparent, injection-molded PMMA frame (Polymethyl methoacrylate, UL-94 HB) and internal PC (polycarbonate, UL-94 V0) opal injection molded diffusor are included with the Miss K. There’s a 0-100% dimmer with a clear, polarized chain. The Miss K difussed light.
The Noctambule device is a series of hanging lamps constructed of glass modules interlinked. The blown glass structure with suspended die-casted aluminium ring connectors, hydroformed steel internal lateral arm and injection moulded outer rings optical silicones diffusers, is cylindrical and semispherical transparent. With the power supply system inside the roof rose the light intensity can be changed in each direction with the 0-10/1-10V, PUSH and DALI regulation by 10 to 100%. Please ask for details in various configurations.
The Noctambule device is a series of hanging lamps constructed of glass modules interlinked. The blown glass structure with suspended die-casted aluminium ring connectors, hydroformed steel internal lateral arm and injection moulded outer rings optical silicones diffusers, is cylindrical and semispherical transparent. With the power supply system inside the roof rose the light intensity can be changed in each direction with the 0-10/1-10V, PUSH and DALI regulation by 10 to 100%. Please ask for details in various configurations.
The Michael Anastassia devote to a distinctive cocoon wraping technology which was so popular by the Italian lighting designer. Overlap is a modern FLOS pendant lamp. This new pendant light is made of steel and cocoon, and its internal structure is painted with white powder. As its name suggests, Overlap is Michal Anastassiades ‘ contemporary pendant lamp, featuring two locking rings which cross in the right corner. This lamp is one of the most recent additions to the new suspension lighting range from the maker. Overlap offers soft, ambient lighting and both impressive and entertaining. You can see the rings pulling through the membrane, but it leaves the imagination in the gap where the two interlocks conceal.
A light made up of two parallel cones, parallel to each other. One takes on the role of a light source and the other serves as a base. The angle of projection can be changed by placing a pin on the base in three stages of 25, 40 or 60 degrees. Through removing redundant objects and making a flat form, different functions are made possible.
The leaves of different form and color are influenced by the natural world and become the imaginative propagators of it that mirror or enable the light to pass through. Serena, by its very definition, is a light that needs to blend in. Desk lamp adjustable with indirect and light reflected. Heatsink, photographic black Screen, optical photographer PMA diffuser, extruded aluminium, photographic. Reflector in pre-anodised aluminum sheared and folded. Length of power of cable 200 cm, Dimmer switch, including ON-OFF and light change from 10 to 100 per cent. Power supply of the plug-in with interchangeable connectors.
A diffused illumination suspension luminaire. Hemispherical cast plaster diffuser with mechanical processing, inside painted white. Outline: rust, black gloss, white gloss, or gold matte. Spreader of plaster of aluminum-alloy die-cast, white liquid-painted. Upper moulded coating in die-cast, aluminum alloy polish, covered by the whole visible component by clear paint.
This ceiling light is part of the Smithfield family and was built by Jasper Morrison for FLOS. The ceiling lamp Smithfield C is both broad and unassuming. It is ideal for a range of conditions, delivering clear light through its aluminum frame. The diffuser is available in black, white or mud gloss. < /p > This ceiling-mounted light provides direct light and is an injection-molded opalescent PC (polycarboxylic). Displayed as black, white or mud and rendered with a methacrylate diffuser moulded with injection, stainless steel frame, ceiling attachable < span class="read-more-text" > chment.
This pendant is part of the Smithfield brand, designed by Jasper Morrison for FLOS. The Smithfield can be wide and incredible. It is ideal for a range of conditions, delivering clear light through its aluminum frame. This is made with injection molded opalescent PC (polycarbonate), made in black, white or water.
The Smithfield is a direct-light suspension lamp. It is fitted with a steel ceiling fixture with a suspension cable. The 3-pole PTFE electric cable in a double isolation is 400 cm long. A steel suspension cable is connected with the ceiling connection, while PTFE double isolation is mounted on the three-pole electronic wire.This pendant lamp is dimmable.
I always see these electric strings from the window while I sit on a train moving. The way the pylons bind, they divided the landscape and are so majestic and poetic, at the same time. Michael Anastassiades Suspension Lamp offering diffused illumination. I tried to turn into interior design. Matt black lacquered aluminum cast body with smooth, transparent lacquered finish. Diffuser optical in the opal machine. 12 meter suspension system with a coaxial cable reinforced by Kevlar.Differently available in black PC and power socket with matt black varnished PC floor switch. Wall / ceiling connection. For optical control, the on / off switch is electronic. The Bluetooth Android and Apple Remote Control device on / off and dimmers are controlled.
Superarchimoon offers direct and diffused light through a plucked tissue external diffuser and acid-etched, handblown inner glass diffuser. A fantastic perspective job. The reinforcement for the diffuser is sandstroke of aluminium and is made up of tubular aluminium and tie rods, a rubber spring in stainless steel and die-cast aluminium joints. The foundation of sand-cast aluminium has 6 counterweights and a cover of polished grey spun-aluminium.
The polarised control cord is coated in silver and has a dimming value of 0%-100%.
NOTE: The delivery time for Superarchimoon is longer than usual. For specifics before ordering, please contact customer support.
Floor lamp customizable with direct light. Aluminum body painted or chrome-plated, metal spinner head, joints with die-cast and extrudered base. PMMA diffuser screened Thread. Edge Lighting light source technology. Sensor of optical switch on the core, with warm tone dimming feature. Length 250 cm. Power cable. Power supply plug-in and interchangeable plug-ins.
“The Tab lamp is a basic folded shape that produces a visually puritous shade that is converted into the desk, floor lamp and sound lamp, as it does E. Barber & J.Osgerby. Table lamp, body in aluminum pure pressofused.
1962 table lamp with indirect and mirrored light, built by Achille & Pier Giacomo Castiglioni. The aluminum reflector is made of painted metal, gloss white outer and matt white inside. A clear blown glass direct diffuser. Matt black body or extruded aluminum naturally anodised. Base in nickel-plated ABS PC. 190 cm of useful electric cable, ON / OFF dimmer, and 10 to 100% light flow change. Power supply of the plug-interchangeable connectors.
1962 table lamp with indirect and mirrored light, built by Achille & Pier Giacomo Castiglioni. The aluminum reflector is made of painted metal, gloss white outer and matt white inside. A clear blown glass direct diffuser. Matt black body or extruded aluminum naturally anodised. Base in nickel-plated ABS PC. 190 cm of useful electric cable, ON / OFF dimmer, and 10 to 100% light flow change. Power supply of the plug-interchangeable connectors.
Light diffused suspension lamp. The internal structure of white powdered steel, sprayed with a special cocoon resin, produces a diffuser that is then covered with a transparent spray on the top.
Tatou started life as a luminaire which crosses a conventional dome style with a surface that is represented by a creative language and allows light to filter from within. Light lamp projected on the table. Polycarbonate exterior diffuser. Interior diffuser of opal polycarbonate written injection. Base and help in painted steel.
This Italian lighting system provides a sleek and lightweight design –suitable for both shopping, art and residential show solutions. That part is flexible and fits in a magnetic light fixture that is compatible. The family has light versions sealed, surface and suspended. Nearly all of the modules are flexible or very customizable.
Crema is a sample of this popular FLOS Tracking magnet lighting device, the only lighting distributor of South African.
Suspension lamp providing diffused light. White powder coated internal steel structure sprayed with a unique cocoon resin to create the diffuser which is then protected by a transparent sprayed on finish.
